Choose the correct cable to connect Router0 Fa0/1 to netacad.pka Fa0. Choose the correct cable to connect Router0 Ser0/0/0 to Router1 Ser0/0. Choose the correct cable to connect Cloud Coax7 to Modem Port0. Choose the correct cable to connect Router0 Fa0/0 to Cloud Eth6. Show cdp neighbor detail on the branch router will give you the IP for BR-SW1. Documentation is incomplete for the network, so some information needs to be discovered. A network administrator has been asked to investigate a new client’s network. Yes, these networks should not be directly reachable from outside for security reasons. The switch has Gigabit Ethernet copper media ports and it has four modular ports. Are all interfaces active? Issue the command to display the current configuration. Test connectivity to TFTP Server. Designate the active router for the HSRP group. This number must be consistent between the routers in the group. Configure HSRP on the G0/1 LAN interface of R1. After the link lights on the connection are both green, test the connection by pinging the Web Server. Locate and select the Copper Straight-Through icon in the pallet of connection types. Which is correct, "I like you the best" or "I like you best"? In the context of a person, use "is" if the person is still in the role/relationship you are talking about, and "was" if they're not in that role/relationship anymore. Now, you might be thinking that "which one is the best" cannot be correct since it's a question format. "Which one is the best" is obviously a question format, so it makes sense that "which one the best is" should be the correct form. Your original is correct as-is, except you need to remove the question mark at the end because it's not a question. My question is, what is the correct way to write this clause? Either is acceptable, and the practical meaning is the same, but their referents, implicit not explicit, are different. In general, when does an end device issue an ARP request? To what IP address does the MAC address entry correspond? How many copies of the PDU did the switch make during the ARP reply? Click Capture/Forward to move the PDU to the next device. Open the PDU and record the destination MAC address. So the computer sends an ARP broadcast frame to find the MAC address of the destination. It connects to the internet interface. Where did the interface IP address come from? The connection to the home is made with coaxial cable. What is the type of connection between the ISP/Telco/Cable Company network and the Home Cable Network? What ports are available on the device and what is connected to them? The phone cable connects to the DSL modem. Do the MAC addresses of the source and destination align with their IP addresses? Open the PDU and examine the MAC addresses. What happened to the source and destination MAC addresses? In addition, nine other addresses are excluded for static assignment to other devices such servers and device management interfaces. You must determine what the IP addresses are so that you can connect to the devices over SSH in order to configure them. However, it does not provide redundant default gateways for end-user devices within the network if a gateway router fails. We use the show mac-address-table command on switches to display the MAC address table The gateway address of the router interface is stored in the IPv4 configuration of the hosts. DHCP traffic from the hosts on the R1 and R3 LANs will be forwarded to these addresses and processed by the DHCP server that is configured on R2. Configure the DHCP pool to include the network address, the default gateway, and the IP address of the DNS server.
